Inspect the fuel pump for damage to housing. Check for damaged threads on fuel filter and elbow connections.
ADJUST (For M-85 Water heater only)
a. With water heater operating, fully open air shutter.
b. Adjust fuel pressure for the following elevations:
4-21. WATER VESSEL AND SKID ASSEMBLIES
This task covers:
Tool set, General (Item 1, Appendix B)
Rags, Wiping (Item 15, Appendix F)
Primer (Item 12, Appendix F)
Paint (Item 11, Appendix F)
Soap (Appendix F, Item 20)
Water heater shut off and cooled down.
Power switch off and power cable disconnected.
Inspect the water vessel and skid assemblies as described in paragraph a through c. Notify direct support maintenance if
any welds are broken or other damage that can not be corrected by cleaning, painting or tightening of bolts.
a. Inspect smoke box cover gasket (1) for breaks, burns or damage.