Tag and disconnect wires from motor contactor (18). Remove two bottom screws (19) and washers
(20) and loosen top screw. Remove motor contactor from control box (17).
Remove six screws (21) and remove three contactor heaters (22).
Tag and disconnect two terminal lugs (23). Remove three screws (24) washers (25), nuts (26) and hour
meter (27) from front of control box (17).
For M-85 only, tag two wires (28) on buzzer (29). Loosen two screws (30) and disconnect wires.
Remove cap (31) and buzzer (29) from front of control box (17).
For M-80 only, tag and disconnect two wires (32) from buzzer (33). Remove two screws (34), and
buzzer (33) from control box (17).
m. Tag and disconnect all wires from panel-mounted component(s).