SPACE HEATER ARCTIC (SHA)
OPERATION UNDER USUAL CONDITIONS
ASSEMBLING THE STACK ASSEMBLY
Outside the Shelter
Securely roll and tie exhaust opening closure flap (1) so it will not touch stack assembly during heater
Inside the Shelter:
Fire or Explosion
Allow at least 2 feet (61 centimeters) clearance between heater and
shelter walls, or shelter fabric may catch fire.
Do Not Leave Components Inside Heater Frame
All components stored in the storage compartment of the heater must be
removed prior to operation. Components are stored in both the upper
and lower portions of the heater. Most of these items are liquid fuel
components which could be damaged by high heat if the heater is
operated with solid fuel.
Set heater (2) directly under shelter exhaust opening (1).
If SHA components are still stored inside the heater, unpack all components and correctly install the
Burner Cover Assembly as outlined earlier in this work package.