SPACE HEATER ARCTIC (SHA)
OPERATION UNDER USUAL CONDITIONS
In extremely cold conditions, if the firing rate on HI setting is not
generating sufficient heat output, tap the control valve and shake the
hoses to eliminate any air that may be trapped. If output is still
insufficient, turn the heater control valve to LO for 5-10 minutes, which
will heat the bottom of the burner. Then turn the control valve back to the
Be sure to perform DURING Operation Preventive Maintenance Checks and Services (PMCS) as
detailed in WP 0010 while the heater is in operation.
Burner assembly is not removable.
Shown removed from heater for
illustrative purposes only.