SPACE HEATER ARCTIC (SHA)
OPERATION UNDER USUAL CONDITIONS
Press down on the top edge of the rear door, swing out and remove.
Wrap tent lines around the stack cap (1) (or stuff the lines inside the cap) and place on the upper right
side of the rear storage enclosure (2)
Place the Fuel Flow Control Valve (3) in the lower left side of the rear storage enclosure (2).
Place the Gravity Feed Adaptor (4) in front of the Fuel Flow Control Valve (1).
Install the rear door over the storage compartment by placing the bottom edge of the door in the slot
along the lower edge of the rear storage compartment and, while applying downward pressure, press the
rear door into the rear storage compartment door frame until it clears the retaining pin. Release the rear