Deploying the Overflow Hose. Uncoil the overflow hose (1) from its stowage area in the heater shell (2).
Route the end of the hose through the small opening (3) at the base of the shelter wall to the left of the
shelter liner opening.
Exit the shelter and pull the overflow hose (1) out through the opening (4) in the shelter wall. Lay the hose
out straight and slightly downhill from the shelter. Place the end of the hose on a section of petroleum
absorbent mat (5).
Ensure that the hose is not placed so that it goes uphill. This would cause any overflow fuel to run back
toward the shelter.