Change 1 4-22.13
4-16.1 REPLACING THE CONTROL PANEL ASSEMBLY FOR MODEL 471012 (Continued)
q. Removing the Base Plate.
(1) Remove the 13 screws (1) and lock washers that secure the base plate (2) and gasket (3) to the main
(2) Remove the base plate (2) and gasket (3), noting that the three feet (4) are on the exterior of the base
(3) If access is required to the heating element, thermal switch, or the tap shank jam nut, or you are
removing the spigot, then remove the piece of insulation (5) located between the base plate (2) and the
heating element retaining plate.
r. Installing the Base Plate.
When installing the base plate, ensure that the base plate gasket is
correctly aligned and that all mating surfaces are clean.