Change 1 2-2.1
2-2. OPERATOR'S CONTROLS AND INDICATORS FOR MODEL RAK-15 (Continued)
3 POWER ON lamp
Indicates power supply status and setting.
Lights when power supply is present and the switch is set to either LO or HI position.
Goes off when power supply is not present or switch is set to the OFF position.
Quick-release toggle clip with self-lock closing and manual unlocking action.
Secures cover in place to maintain steam/watertight seal with the main case.
Latch bridle engages with the latch hook on the front edge of the cover.
Spring-loaded pull-to-operate action.
Protective shroud prevents accidental hand contact with steam or heated water.
Allows water to be drained-off from the outer container.
2-2.1 OPERATOR'S CONTROLS AND INDICATORS FOR MODEL 471012
The operators controls and indicators are all located on the front of the HWR.
1 I/O/II switch (3-position)
Selects heating range of 150 -160 oF (66 - 71 oC) when set to the LO position.
Deselects heating when set to the center OFF position.
Selects heating range of 180 -190 oF (82 88 oC) when set to the HI position.
2 HEATER ON lamp
Indicates heating cycle status.
Lights when power is being applied to the heater.
Goes off when the selected temperature is reached.