2-12 Change 1
2-9. OPERATING PROCEDURES FOR MODEL RAK-15 (Continued)
Position the cover (8) on the hinge pivot bar (10) then carefully lower into position
making sure that it is properly aligned with the top of the main case (11).
With the cover (8) in place, engage the latch bridle (6) with the latch hook (7) then push
the operating lever (5) to the "fully-down" position and verify that it is locked by
attempting to pull it outwards.
The latch self-locking mechanism engages automatically with an
audible "click" when the operating lever is in the "fully-down" position.