FIGURE 16 LUBRICATION ORDER
HEATER, HOT OIL, TRLR. MTD.
2,100,000 BTU VOLCANIC MODEL 200STM77
Intervals are based on normal hours of operation.
Clean parts with SOLVENT, dry-cleaning or with OIL,
Adjust to compensate for abnormal operation and severe
FUEL, DIESEL. Dry before lubricating.
During inactive periods, sufficient
Clean fittings before lubricating.
lubrications must be performed for adequate
Lubricate points indicated by dotted arrow shafts on both
sides of equipment.
1. OIL CAN POINTS. Every 50 hours lubricate control linkages, jack screws, and all exposed adjusting threads
2. LIBRICANTS. The following is a list of lubricants with the Military Symbols and applicable specification
OE MIL-L 2104