Operator/Crew Preventive Maintenance Checks and Services
ITEM TO BE INSPECTED
FOR READINESS REPORTING
Procedure: Check For And Have Repaired,
Equipment is Not Ready
No. B D A W M
Filled or Adjusted As Needed Available If:
PERFORM WEEKLY AS WELL AS BEFORE PMCS'S IF:
a. You are the assigned operator but have not
operated the equipment since the last weekly PMCS.
a. Check for loose wiring.
b. Check for damaged piping.
c. Check for evidence of fluid leakage (oil, fuel)
Class III leaks found.
SURGE, COLD SEAL AND EXPANSION TANK
Check level of heat transfer oil. Fill or drain
a. Check for cuts and general condition.
One or more tire miss-
ing, flat and/or unser-
b. Check for correct air pressure 65 PSI (29.48 Kg's)
HOT FLUID STRAINERS:
Service, drain water and sedimate.
GROUNDING ROD AND TERMINAL
Check for proper grounding and tight connections.
CONTROLS AND INSTRUMENTS:
Check for proper indication and operation.