Table 4-2. Unit Troubleshooting - CONT.
TEST OR INSPECTION
CHASSIS ELECTRICAL (CONT)
TAILLIGHTS DO NOT OPERATE (CONT).
Remove screws and cover from junction box. Using a multimeter, check for continuity across
terminals on circuit breaker marked BRN.
If continuity is present, replace or repair wiring between junction box and junction block.
If continuity is not present, replace circuit breaker (page 4-97).
Using a multimeter, check for continuity across pin marked BRN and jumper to the circuit breaker
If continuity is not present, replace 12 Vdc intervehicular connector receptacle (page 4-97).