on the upper left front of the housing and it
c. To provide heat for boxcars during loading or
specifies the following: manufacturer, nomen-
unloading.
clature, part number, serial number, contract
d. To heat and/or ventilate tunnels and sewers.
number and capacity rating. The U.S. iden-
e. To ventilate without heating by closing the bur-
tification plate is located on the upper left
ner fuel line shutoff valve and operating the engine
front of the housing and it specifies the
driven ventilating air fan. The air ducts would be
following: nomenclature, model, contract num-
utilized in the usual manner.
ber, capacity rating, gross weight, length,
height, width engine serial number, cube and
manufacturer.
The heater has two identification plates. The
manufacturer's identification plate is located
Tabulated data is as follows:
a. Engine.
. Military Standard Engine
Make . . . . . . . . . . . ..
.
.
.
.
.
.
Model . . . . . . . . . . . . . . . . . . .. . . .. . . . . . . . . . . . . 1A08-3
. . . . . . . . . . . . . . 4-cycle, gasoline overhead valve,
Type
.
.
.
.
.
.
.
.
.
.
air cooled
Number of Cylinders . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . 1
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.250 inch
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 inch
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 cubic inches
Compression ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:1
. 1.5
.
.
.
.
Horsepower at 2,600 rpm . . . .. . . .. . . . . . . . . . . . . . . . .