average time required to do the function is the work time figure. If the number or complexity of
tasks within a maintenance function varies from one maintenance level to another, the applicable work
time figure for each level will be entered for that function.
The work time figure represents the
average time it takes to restore a component/assembly to a serviceable condition under a typical
field operating environment.
e. Column (5), Tools and Equipment.
Column 5 specifies, by code, common tool sets (not indi-
vidual tools from those sets), common TMDE, and special tools, TMDE, and support equipment required
to perform a designated function.
The code in Column 5 keys to the listing in Section Ill of the MAC.
f. Column (6), Remarks. This column, when applicable, contains a letter code which is keyed to
an explanation of the code contained in Section IV of the MAC.
B-5. EXPLANATION OF COLUMNS IN THE MAC, SECTION Ill
a. Column (1), Tool or Test Equipment Reference Code.
The tool or test equipment reference
code correlates with a code used in the MAC, Section II, Column 5.
b. Column (2), Maintenance Category.
The lowest category of maintenance authorized to use
the tool or test equipment.
c. Column (3), Nomenclature.
Name or identification of the tool or test equipment.
d. Column (4), National/NATO Stock Number. The national stock number of the tool or test
e. Column (5), Tool Number. The manufacturers part number.
B-6. EXPLANATION OF COLUMNS IN THE MAC, SECTION IV
a. Column (1), Reference Code. The code recorded in Column 6, Section II
b. Column (2), Remarks. This column lists information pertinent to the maintenance function
being performed as indicated in the MAC, Section II.