f. Open control box (15) and unlock two studs (16) which secure control box to heater case.
Rotate control box 180° so that cover is upright.
Tighten studs. Close control box.
3 - 1 2 . A D D I T I O N A L I T E M S R E Q U I R ED
In addition to items furnished with heater (para 3-7),
terns listed in table 3-1 are necessary for
Table 3-1. Additional Items
3-wire, 16-gauge shielded cable
Connects room thermostat to heater.
3-wire, 12-gauge cable
Connects power plug to power source.
2-wire, 16-gauge cable
Connects fuel pump to heater.
Connects fuel container to external fuel
Connects external fuel pump to fuel inlet
Connects fuel overflow fitting to overflow
l/4-inch mounting bolts (washers
Secures external fuel pump.
and nuts, if needed) or lag screws
Mates with external fuel pump connector
Fuel container, with shutoff
Provides fuel supply for heater.
Collects overflow fuel at fuel overflow fitting
Mates with 2-inch male pipe fitting at rear of
5/16-inch mounting bolts (washers
Secures heater to mounting surface.
and nuts if needed) or lag screws