• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
H-45 TYPE I (SOLID FUEL) HEATER CONT. - TM-9-4520-257-12P_120
H-45 TYPE I (SOLID FUEL) AND TYPE II (LIQUID FUEL) HEATERS CONT. - TM-9-4520-257-12P_122

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
  86    87    88    89    90  91  92    93    94    95    96  
TM 9-4520-257-12&P                                                      0020 00 OPERATOR MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE I, SOLID FUEL)   NSN 4520-01-354-1191 (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 STACK PIPE ASSEMBLY INSPECT, SERVICE, REPLACE 0020 00-1 H-45 TYPE I (SOLID FUEL) AND TYPE II (LIQUID FUEL) HEATERS REMOVE 1.    Remove the stack pipe assembly (1) from the stack flange (2) on the top heater shell (3). 2.    Remove the stack cap assembly (4) from the stack pipe assembly (1). 3.    Disassemble the stack pipe assembly (1). INSPECT Inspect the six stack pipe sections for holes, loose fitting joints, distortions, and soot.     SERVICE Clean any soot and carbon deposits from the pipe sections using rags or brushes. REPLACE   If damaged, replace the stack pipe assembly (1). INSTALL (REFER TO WP 0005 00) 1.    Reassemble the stack pipes. 2.    Install the stack pipe assembly (1) on the flange (2) on the top heater shell (3). INITIAL SETUP:   Materials Brush (WP 0052 00, Table 1, Item 3) Rags (WP 0052 00, Table 1, Item 7) Personnel Required One Equipment Condition   H-45 shutdown and cool (WP 0005 00) Guy lines anchoring stack pipe untied from                stakes (WP 0005 00)







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.