• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_165
UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_168

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
  120    4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR" class="tooltip">121    4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR CONT. - TM-9-4520-257-12P_162" class="tooltip">122    4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR CONT. - TM-9-4520-257-12P_163" class="tooltip">123    4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_165" class="tooltip">124  125  4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_168" class="tooltip">126    4520-01-329-3451 CUP AND CABLE ASSEMBLY SERVICE, REPAIR, REPLACE" class="tooltip">127    4520-01-329-3451 CUP AND CABLE ASSEMBLY SERVICE, REPAIR, REPLACE CONT." class="tooltip">128    4520-01-329-3451 FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE" class="tooltip">129    4520-01-329-3451 FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE CONT." class="tooltip">130  
TM 9-4520-257-12&P                                                      0037 00 UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 HIGH FIRE RING SERVICE, REPAIR, REPLACE 0037 00-1 INITIAL SETUP:    Tools General Mechanic’s Tool Kit (WP 0041 00, Table 2, Item 1) Materials/Parts   Absorbent Material (WP 0052 00, Table 1, Item 1) Anti-seize compound (WP 0052 00, Table 1,    Item 2) Brush (WP 0052 00, Table 1, Item 3) Item 2) Rags (WP 0052 00, Table 1, Item 7) Personnel Required One References WP 0005 00, WP 0013 00 Equipment Condition   Heater shut down and cool (WP 0005 00) Top heater shell removed (WP 0013 00)   H-45 TYPE II (LIQUID FUEL) HEATER HIGH FIRE RING ASSEMBLY REMOVE Remove the screws (1) and clamps (2) securing the high fire ring (3), and lift the high fire ring out of the burner shell assembly (4).    SERVICE Using clean fuel, rags, and a brush, clean the high fire ring (3) as necessary to remove soot and carbon buildup. REPAIR Straighten bends and dents to the clamps (2) and high fire ring (3) to the extent possible.    REPLACE Replace the high fire ring (3) and clamps (2) if they are corroded or severely bent. INSTALL 1.    Position the high fire ring (3) on the burner shell assembly (4). 2.    Install the high fire ring clamps (2), apply anti-seize compound to the screw threads (1), and secure the clamps (2) with the screws (1).  Be sure the high fire ring (3) is properly seated, level, and not obstructing the top row of the burner holes. 3.    Install the top heater shell (refer to WP 0013).







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.