TM 9-4520-257-12&P 0005 00
2. Outside the tent, remove the attached fuel cap (3) from the mouth (4) of the fuel can (5), and replace
it with the gravity feeder adapter (6). Screw the adapter onto the fuel can securely.
3. While the fuel can is still upright, attach the fuel supply hose (8) to the gravity feed adapter (6). To do
this, pull back on the gravity feed adapter female QD fitting (9), insert the fuel supply hose male QD
fitting (7) into the gravity feed adapter female QD fitting (9), and release the female QD fitting (9).
Gently pull on the fuel supply hose (8) to ensure the connection is secure. Set the assembled fuel
can aside in the upright position.
4. At the fuel supply site, set up the fuel can stand with the fuel can (5) level with or slightly above the
heater as detailed in the next section of this work package.
INSTALLING THE GRAVITY FEED ADAPTER ON THE FUEL CAN
with the heater)