TM 9-4520-258-14
5-7. FRAME ASSEMBLY - continued.
b.
Inspection
Inspect for cracks, broken locks, rivets and broken frame parts.
c.
Repair
(a)
Weld frame as required in accordance with TM 9-237.
(b)
Paint frame in accordance with TM 40-0139.
d.
Assembly (Refer to Figure 5-25)
(1)
Install receptacles (1) as required by installing two rivets (2).
(2)
Install rivnuts (3) as required.
(3)
Install heat exchanger brace (4) and secure with four flat washers (5), two screws (6), two lockwashers
(7), two nuts (8) and grommet (9).
(4)
Install wheel pivot (10), four screws (11), four flatwashers (12), four lockwashers (13) and four nuts
(14).
Figure 5-25. Frame Assembly (Sheet 1 of 2)
5-40