TM 9-4520-258-14
F-2. MANUFACTURED ITEMS PART NUMBER INDEX - continued.
NOTES:
1.
Made from Rubber and wire mesh, Adhesive back, P/N 01-064-1756 (57003).
2.
Cut each gasket to length cut two 45 degree angles as shown.
3.
Place on location so wire mesh is to the outside perimeter and mark hole location, remove and punch holes.
4.
Peel plastic strip off back of gasket and install so wire mesh is to the outside perimeter on unit
Figure F-36. Gasket, Transformer
F-38