TM 9-4520-271-14
0038 00
DISASSEMBLY - Continued
EMI Jumper and Terminal Board TB4 Removal
1.
Remove front panel assembly (WP 0038 00-1).
2.
Tag and disconnect all wires and two EMI jumper (1) leads by removing eight screws (2) from terminal board TB4 (3).
3.
Cut wire ties as required.
4.
Remove two nuts (4), lockwashers (5), washers (6), screws (7), EMI jumper (1), terminal board TB4 (3), and marker
strip (8).