LOCAL MOBILITY HANDLES. Hand rails
are installed at either end of the heater to
assist in fine positioning the LCFH outside
LIFT/TIE DOWN RINGS. Provided at the
top four corners of the LCFH to permit
airlifting of the heater or to provide tie down
points when the heater is transported.
SLAVE CONNECTOR. A slave connector is
mounted on the rear sidewall of the heater
on the fresh air inlet side. The slave
connector is designed to be connected to a
24V source to provide an additional source
of power in conditions of extreme cold.
The slave connector is not to be used to
provide power to other vehicles or