3-4. TOUCH-UP PAINTING - Continued
Primer shall conform to Specification TT-P-636.
Enamel shall conform to Class A or B of Specification TT-E-529. The color shall approximate color number
X24087, olive drab of Federal Standard 595.
Painting of material should be done In the open during dry weather while the
temperature Is not below 50°F (10°C). Adequate forced draft ventilation for Indoor
work should be provided to carry off fumes.
3-5. IMMERSION HEATER
Burner. Operator/crew maintenance is limited to installation which consists of placing the burner down inside the
heater body (Figure 3-3).
Figure 3-3. Immersion Heater Burner Installation