SECTION III. REMARKS
Inspect for dents or open seams, holes, broken welds.
Clean dirt and grease from Immersion Heater Body.
Inspect for legibility.
Inspect burner for evidence of cracks and distortion.
Clean vaporizer plate.
Inspect lighter cup for evidence of distortion; also wick for distortion and loose fit of wick
Inspect fuel filler plug for proper fit of plug and gasket; also vent cap. Check for leaks.
Fill to designated capacity.
Clean any obstruction from valve.
Inspect serviceability, i.e., holes, sharp edges.
Clean soot from pipe.
Inspect burner hood for damage or distorted hinge.
These items are part of the heater body weldment and are not shown separately on the