Remove Chassis Assembly (Continued):
S o l d i e r A : 4 .
Lift chassis assembly (1) off case (2).
(1) on clean work surface.
Lift case (2) and place on clean work
Look at case (2) for dents, cracks, or
replace case (2). Look at grill (4) for
refer to task 3. lf OK, go to step 4.
Carefully set chassis assembly
surface in Iine with chassis
broken latches (3). If bad,
dents, cracks, or breaks. If bad,
Look at connector P1 (5) for corroded contacts. If bad, replace
connector P1 (5); refer to task 4.
Connect connector P1 (5) to chassis assembly (1) with flat tip
Frame 4 deleted.
NOTE: To install thermal system test controller, refer to task 8.
TASK 1 ENDS HERE
2-8 Change 1
Para. 2-5, Task 1
All data on pages 2-9 and 2-10 deleted.