T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 16
Remove Terminal Board:
1.
2.
3.
4.
5.
6.
NOTE
l
If terminal board (1) is being removed for access only,
do steps 1 and 2 only.
l
Read paragraph 2-4 on tagging and soldering wires
before doing any more work.
l
Use this task to replace any of six terminal boards (1).
Unscrew and take out two machine screws (2) and flat washers (3) from terminal
board (1) with screwdriver.
CarefulIy puII terminal board (1) away from wall of encIosure (4).
Cut lacing tape as needed to gain access to wires (5) with pliers.
Tag and unsolder wires (5) from terminal board (1).
Turn in bad terminal board (1).
Solder wires (5) to new terminal board (1).
Follow-on Maintenance:
NOTE: To install terminal boards, refer to task 18.
TASK 7 ENDS HERE
Volume IV
2-236
Para. 2-9, Task 7