TM-10-4520-262-12P Space Heater Convective Manual

SCOPE - TM-10-4520-262-12P_15
SAFETY, CARE, AND HANDLING
CORROSION PREVENTION AND CONTROL (CPC) - TM-10-4520-262-12P_17
EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES - TM-10-4520-262-12P_18
IN-TENT CONTROLLER ASSEMBLY
AIR RETURN DUCT WITH DEBRIS GRILL
ACCESSORY BAG
BURNER ASSEMBLY - TM-10-4520-262-12P_24
POWER CONTROL ASSEMBLY
POWER CONTROL ASSEMBLY (cont)
ONBOARD SPARES AND TOOL.
OPTIONAL ITEMS (TO ENABLE OPERATION OF HEATER INSIDE TENT)
Table 1. EQUIPMENT DATA
THEORY OF OPERATION
THEORY OF OPERATION (cont)
THEORY OF OPERATION (cont) - TM-10-4520-262-12P_33
CONTROLS, INDICATORS, AND LABELS/INSTRUCTION PLATES
Table 1. In-Tent Control Assembly Controls and Indicators
GENERAL - TM-10-4520-262-12P_39
Table 2. Lower Housing Assembly Controls and Indicators
Table 3. SHC Labels and Instruction Plates - TM-10-4520-262-12P_41
Table 3. SHC Labels and Instruction Plates - TM-10-4520-262-12P_42
Table 3. SHC Labels and Instruction Plates
Side View of Heater (Fuel Inlet Side)
PREPARATION FOR USE
SPACE HEATER CONVECTIVE (SHC) TENT WALL MODIFICATION KIT (TWMK) INSTALLATION
SPACE HEATER CONVECTIVE (SHC) TENT WALL MODIFICATION KIT (TWMK) INSTALLATION (cont) - TM-10-4520-262-12P_49
SPACE HEATER CONVECTIVE (SHC) TENT WALL MODIFICATION KIT (TWMK) INSTALLATION (cont) - TM-10-4520-262-12P_50
SITE SELECTION CRITERIA (OUTSIDE THE TENT)
BEFORE OPERATION PMCS
Positioning the Heater Outside Tent
FILL FUEL CAN WITH FUEL AND INSTALL FUEL CAN ADAPTER
Assemble Fuel Can Stand
Assemble Fuel Can Stand (cont)
HEATER SETUP
Connect In-Tent Controller Assembly To In-Tent Controller Cable
Routing the In-tent Controller and Cable Through the Tent Duct Tunnel. - TM-10-4520-262-12P_59
Routing the In-tent Controller and Cable Through the Tent Duct Tunnel. - TM-10-4520-262-12P_60
Positioning the In-tent Controller Inside the Tent. - TM-10-4520-262-12P_61
Positioning the In-tent Controller Inside the Tent. - TM-10-4520-262-12P_62
CONNECT FUEL HOSE TO HEATER
INSTALLING THE AIR SUPPLY AND RETURN DUCTS - TM-10-4520-262-12P_64
Installing Debris Grills in Air Supply and Return Ducts
Installing The Air Supply And Return Ducts - TM-10-4520-262-12P_66
Installing The Air Supply And Return Ducts - TM-10-4520-262-12P_67
FINAL CHECKS BEFORE OPERATION
OPERATING THE CONVECTIVE SPACE HEATER
STARTING THE HEATER
Pre-purge
STOPPING THE HEATER
REFUELING WITH THE SAME FUEL
REFUELING WITH THE SAME FUEL (cont)
REFUELING WITH A DIFFERENT FUEL
REFUELING WITH A DIFFERENT FUEL (cont)
REFUELING WITH A DIFFERENT FUEL (cont) - TM-10-4520-262-12P_77
REFUELING WITH A DIFFERENT FUEL (cont) - TM-10-4520-262-12P_78
HEATER SHUTDOWN
CHARGING THE BATTERY WITH A EXTERNAL CHARGER
PREPARATION FOR MOVEMENT - TM-10-4520-262-12P_81
OPERATION IN EXTREME SAND, DUST, AND/OR HIGH WINDS
OPERATION IN EXTREME SAND, DUST, AND/OR HIGH WINDS (cnont)
OPERATION IN EXTREME RAIN OR HUMIDITY
OPERATION IN EXTREME RAIN OR HUMIDITY (cont)
OPERATION IN EXTREME COLD
OPERATION IN EXTREME COLD (cont)
NBC DECONTAMINATION PROCEDURES - TM-10-4520-262-12P_89
TROUBLESHOOTING PROCEDURES - TM-10-4520-262-12P_93
OPERATOR TROUBLESHOOTING PROCEDURES
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_96
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_97
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_98
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_99
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_100
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_101
Table 1. Operator Troubleshooting Procedures - TM-10-4520-262-12P_102
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
SPECIAL INSTRUCTIONS
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_107
Air Supply and Return Ducts
Table 1. Operator Preventive Maintenance Checks and Services
Fuel Can Stand
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_111
In-Tent Controller Assembly Cable
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_113
Combustion Air Inlet Assembly
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_115
Fastener housing and keeper assemblies
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_117
Battery Pack
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_119
Exhaust Grommet
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_121
Onboard Spares and Tool
INTRODUCTION - TM-10-4520-262-12P_123
FLAME SENSOR REPLACE
REPLACE - TM-10-4520-262-12P_126
REPLACE (cont) - TM-10-4520-262-12P_127
GLOW PLUG REPLACE
GLOW PLUG REPLACE (cont)
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Table 1. Operator Preventive Maintenance Checks and Services - TM-10-4520-262-12P_134
GENERAL - TM-10-4520-262-12P_135
CLEANING AND INSPECTION OF ANTIFRICTION BEARINGS - TM-10-4520-262-12P_136
IN-TENT CONTROLLER ASSEMBLY INSPECT, TEST, REPLACE
REPLACE - TM-10-4520-262-12P_138
IN-TENT CONTROLLER CABLE ASSEMBLY INSPECT, TEST, REPLACE
TEST - TM-10-4520-262-12P_140
BATTERY PACK ASSY INSPECT, TEST, REPLACE
TEST
SERVICE - TM-10-4520-262-12P_143
REPLACE - TM-10-4520-262-12P_144
FUEL SUPPLY QUICK DISCONNECT INSPECT, REPLACE
REPLACE - TM-10-4520-262-12P_146
FUEL SOLENOID VALVE AND SEDIMENT STRAINER ASSEMBLY INSPECT, SERVICE, REPLACE
SERVICE - TM-10-4520-262-12P_148
SERVICE (cont)
REPLACE - TM-10-4520-262-12P_150
REPLACE (cont) - TM-10-4520-262-12P_151
REPLACE (cont) - TM-10-4520-262-12P_152
REPLACE (cont) - TM-10-4520-262-12P_153
FUEL HOSE INSPECT, REPLACE
REPLACE - TM-10-4520-262-12P_156
REPLACE (cont) - TM-10-4520-262-12P_157
HEATER CONTROL ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_160
WIRE HARNESS INSPECT, REPAIR
REPAIR - TM-10-4520-262-12P_162
POWER CONTROL ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_164
IGNITION PACK ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_166
DUST COVER ASSEMBLY INSPECT, REPLACE
REPLACE - TM-10-4520-262-12P_168
COMBUSTION AIR BLOWER ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_170
REPLACE (cont) - TM-10-4520-262-12P_171
COMBUSTION AIR BLOWER DUCT ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_174
COMBUSTION AIR INLET ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_176
UPPER HOUSING ASSEMBLY SERVICE, REPLACE
REPLACE - TM-10-4520-262-12P_178
EXHAUST GROMMET REPLACE
REPLACE - TM-10-4520-262-12P_180
REPLACE - TM-10-4520-262-12P_181
REPLACE (cont) - TM-10-4520-262-12P_182
HEATED AIR BLOWER ASSEMBLY INSPECT, TEST, REPLACE
REPLACE - TM-10-4520-262-12P_184
REPLACE (cont) - TM-10-4520-262-12P_185
REPLACE (cont) - TM-10-4520-262-12P_186
FUEL PUMP REPLACE
REPLACE - TM-10-4520-262-12P_188
REPLACE (cont) - TM-10-4520-262-12P_189
INTERNAL FUEL LINES REPLACE
REPLACE - TM-10-4520-262-12P_192
FLOAT ASSEMBLY REPLACE
REPLACE - TM-10-4520-262-12P_194
REPLACE (cont) - TM-10-4520-262-12P_195
BURNER ASSEMBLY REMOVE, INSPECT, SERVICE, REPLACE
REMOVE - TM-10-4520-262-12P_198
REMOVE (cont) - TM-10-4520-262-12P_199
REMOVE (cont) - TM-10-4520-262-12P_200
INSPECT - TM-10-4520-262-12P_201
SERVICE - TM-10-4520-262-12P_202
REPLACE - TM-10-4520-262-12P_203
REPLACE (cont) - TM-10-4520-262-12P_204
REPLACE (cont) - TM-10-4520-262-12P_205
THERMOELECTRIC GENERATOR (TEG) REMOVE, INSPECT, TEST, REPLACE
REMOVE - TM-10-4520-262-12P_208
REMOVE (cont) - TM-10-4520-262-12P_209
INSPECT - TM-10-4520-262-12P_210
TEST - TM-10-4520-262-12P_211
REPLACE - TM-10-4520-262-12P_212
REPLACE (cont) - TM-10-4520-262-12P_213
REPLACE (cont) - TM-10-4520-262-12P_214
HEAT EXCHANGER REMOVE, INSPECT, TEST, REPLACE
REMOVE - TM-10-4520-262-12P_216
REMOVE (cont) - TM-10-4520-262-12P_217
SERVICE
INSPECT - TM-10-4520-262-12P_219
REPLACE - TM-10-4520-262-12P_220
REPLACE (cont) - TM-10-4520-262-12P_221
REPLACE (cont) - TM-10-4520-262-12P_222
REPLACE (cont) - TM-10-4520-262-12P_223
SERVICE - TM-10-4520-262-12P_225
RETURN AND SUPPLY DUCTS WITH DEBRIS GRILLS INSPECT, REMOVE, REPAIR
REPAIR
PREPARATION FOR STORAGE OR SHIPMENT
PRESERVATION
ADMINISTRATIVE STORAGE
REFERENCES - TM-10-4520-262-12P_235
MAINTENANCE ALLOCATION CHART - TM-10-4520-262-12P_237
Explanation of Columns in the MAC - TM-10-4520-262-12P_238
Explanation of Columns in the MAC (cont)
Table 1. MAINTENANCE ALLOCATION CHART for SPACE HEATER, CONVECTIVE
Table 1. MAINTENANCE ALLOCATION CHART for SPACE HEATER, CONVECTIVE - TM-10-4520-262-12P_241
Table 1. MAINTENANCE ALLOCATION CHART for SPACE HEATER, CONVECTIVE - TM-10-4520-262-12P_242
REPAIR PARTS AND SPECIAL TOOLS LIST
EXPLANATION OF COLUMNS IN THE REPAIR PARTS LIST AND SPECIAL TOOLS LIST WORK PACKAGES - TM-10-4520-262-12P_244
Source Code - TM-10-4520-262-12P_245
Source Code (cont
DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)).
EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS
SPECIAL INFORMATION
When P/N Is Known
Figure 1. In-tent Controller Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_253
Figure 2. Battery Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_257
Figure 3. External Fuel System Components
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_261
Figure 4. Electronic Control System
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_265
Figure 5. Chain and Dust Cover Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_269
Figure 6. Internal Combustion Air System
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_273
Figure 7. Combustion Air Inlet Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_277
Figure 8. Upper Housing Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_281
Figure 9. Exhaust Grommet
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_285
Figure 10. Duct Adapters
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_289
Figure 11. Heated Air Blower Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_293
Figure 12. Internal Fuel System
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_297
Figure 13. Burner Assembly
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_301
Figure 14. Thermoelectric Generator (TEG)
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_305
Figure 15. Heat Exchanger
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_309
Figure 16. Air Return And Supply Ducts With Debris Grill
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_313
Figure 17. Spares, Tools, and Accessories
DESCRIPTION AND USABLE ON CODE (UOC) - TM-10-4520-262-12P_317
NATIONAL STOCK NUMBER (NSN) INDEX
PART NUMBER INDEX - TM-10-4520-262-12P_321
PART NUMBER INDEX
COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS - TM-10-4520-262-12P_323
COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS (cont)
Section II. COMPONENTS OF END ITEM - TM-10-4520-262-12P_325
Section III. BASIC ISSUE ITEMS - TM-10-4520-262-12P_326
ADDITIONAL AUTHORIZATION LIST (AAL) - TM-10-4520-262-12P_327
EXPENDABLE AND DURABLE ITEMS LIST - TM-10-4520-262-12P_329
Item Name, Part Number, (CAGEC)
LUBRICATION INSTRUCTIONS - TM-10-4520-262-12P_331
TORQUE LIMITS - TM-10-4520-262-12P_333
Table 2. General Torque Requirements for Dry Fasteners
Table 3. Locknut Breakaway Torque Values
Table 1. Mandatory Replacement Parts
GLOSSARY - TM-10-4520-262-12P_339
PREPURGE
The Metric System and Equivalents - TM-10-4520-262-12P_363

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business