TM 10-4520-263-12&P
0005 00
0005 00-11
Locate sections “1” and “2” and place the crimped end of section “1” into the uncrimped end of section
“2”. Engage the two sections and push them firmly together. Ensure that the sections go together
securely.
Locate the section numbered “3” and install it on the crimped end of section “2”. Press together securely.
Continue assembling the remaining sections until all six sections are in place. Ensure that the stack is
straight and that all sections fit together securely.
If not already done, tie one end of each guy line (1) through the loop (2) on each of the three wire ropes
(3) located on the rain cap (4) with a double overhand knot.
Install the rain cap (4) onto the top of section “6” (5). Push the rain cap (4) onto the end of the section
securely.
1
2
3
4
4
5
