TM 10-4520-263-12&P
0005 00
0005 00-24
PREPARATION FOR STORAGE OR SHIPMENT
Heater must be shut down and disassembled as described in this work package.
Drain the fuel tank by removing the fuel cap and pouring the fuel from the heater into an approved
container. Use the priming bulb to transfer any remaining fuel in the tank to the container. Replace the
fuel cap on the heater.
Perform all AFTER OPERATION Preventive Maintenance Checks and Services (PMCS) as described in
WP 0010.
Remove the tent collar assembly from the tent and stow between the heat shield and the burner canister.
If any maintenance is required at the unit level, refer to the heater to unit maintenance for repair prior to
storage or shipment.