TM 10-4520-263-12&P
0010 00
0010 00-2
There are some common items to check on the SHS and associated equipment. These include the
following:
§ Proper operation of SHS fuel control valve and burner rate control.
§ Condition of overflow hose
§ Condition of stack assembly, rain cap, and guy lines
§ Accumulation of carbon deposits inside burner canister
LUBRICATION SERVICE INTERVALS
All metal heater components should be wiped down with a rag before storage or after cleaning to prevent
rust.
CLEANING
Proper cleaning of the SHS and components is an integral part of maintenance. It will help prevent
possible problems in the future, so make it a habit to clean the SHS and its components whenever
necessary.
The heater frame can be cleaned with a rag. Wipe down overflow hose with a rag.
After operating the heater, be sure to clean the inside of the stack assembly sections with a rag or brush
to remove any creosote buildup that may occur.
