Precision Scientific Group
PrecisionTM Instruction Manual
3737 West Cortland Street
Chicago, Illinois 60647
TS-74801 AR-3
Telephone 312-X27-2660
Telex 25-4028
High temperature bronze block gum bath
Introduction
Your satisfaction and safety are important to GCA/PRECISION SCIENTIFIC, and a complete understanding of this unit is
necessary to attain these objectives.
As the ultimate user of this apparatus, it is your responsibility to understand its proper function and operational
characteristics. This instruction manual should be thoroughly read and all operators given adequate training before
attempting to place this unit in service. Awareness of the stated cautions and warnings, and compliance with
recommended operating parameters--together with maintenance requirements--are important for safe and satisfactory
operation. The unit should be used for its intended application; alterations or modifications will void the Warranty.
WARNING: Always wear safety glasses when working with this apparatus, as a routine
laboratory precaution.
This apparatus is not designed for use in Class I, II, or III locations as defined by the National Electrical Code.
Unpacking and damage
Save all packing material if apparatus is received damaged. This merchandise was carefully packed and thoroughly
inspected before leaving our factory. Responsibility for its safe delivery was assumed by the carrier upon acceptance of
the shipment; therefore, claims for loss or damage sustained in transit must be made upon the carrier by the recipient as
follows:
Visible Loss or Damage: Note any external evidence of loss or damage on the freight bill, or express receipt, and have
it signed by the carrier's agent. Failure to adequately describe such external evidence of loss or damage may result in
the carrier's refusing to honor your damage claim. The form required to file such a claim will be supplied by the carrier.
Concealed Loss or Damage: Concealed loss or damage means loss or damage which does not become apparent until
the merchandise has been unpacked and inspected. Should either occur, make a written request for inspection by the
carrier's agent within 15 days of the delivery date; then file a claim with the carrier since the damage is the carrier's
responsibility.
By following these instructions carefully, we guarantee our full support of your claim to be compensated for loss from
concealed damage.
DO NOT -- FOR ANY REASON -- RETURN THIS UNIT WITHOUT FIRST OBTAINING AUTHORIZATION. In any
correspondence to GCA/PRECISION SCIENTIFIC, please supply the nameplate data, including catalog number and
serial number.
-1-
