26.
a.
Replace broken reflectors as follows: Remove the two nuts, lockwashers, and bolts securing the
reflector to the trailer chassis. Remove the reflector. Place a new reflector in position and
secure with a bolt, lockwasher and nut at each side of the reflector.
27.
Chocks, Chassis and Mud Guards
a.
Ascertain that chocks are secured in their proper location either under wheels while equipment is
in operation or in their cradles for towing the hot oil heater to a new jobsite
b.
Inspect retaining chains for cracks or possible breakage. Inspect and replace extremely worn
links.
c.
Inspect mud guards for possible tears, loose bolts or general deterioration. Report any
deficiencies to the proper authority.
28. Tires and Wheels
a.
Inspect tires for proper inflation, cuts, bruises, bulges and worn spots Tire pressure should be 65
pounds per square inch.
b.
Inspect lug nuts to insure their proper tightness. Report any damage or malfunctioning to the
proper authority.
NOTE: IT IS IMPORTANT TO GIVE PROMPT ATTENTION TO THE DISCOVERY OF ANY
DAMAGE OR MALFUNCTIONING AS DELAY WILL FURTHER AGGRAVATE
EXISTING DAMAGE.
41
