b.
Remove for Cleaning and Inspection.
1.
Loosen screws in pump starter cover.
2.
Remove cover from starter enclosure, Fig. 33.
3.
Remove protective boot from pushbutton.
4.
Turn nut counterclockwise on pushbutton; remove nut.
5.
Remove pushbutton from cover.
c.
Cleaning and Inspection.
1.
Clean all parts with a cloth dampened in an approved cleaning solvent and dry thoroughly.
2.
Inspect the switch or pushbutton for corrosion, defective operation, or other damage. Replace a defective
switch or pushbutton.
Figure 40. CONTROL SWITCHES.
75
