SECTION II
TM5-3895-354-14&P
(5) Part numbers for bulk materials are
number combination which places the first letter or digit of
referenced in this column in the line item entry for the
each group in order A through Z, followed by the numbers 0
item to be manufactured/fabricated.
through 9 and each following letter or digit in like order.)
(6) When the item is not used with all serial
(1) CAGEC column.
The Commercial And
numbers of the same model, the effective serial
Government Entity (CAGE) Code (C) is a 5 digit
numbers are shown on the last line(s) of the
alphanumeric code used to identify the manufacturer,
description (be-fore UOC). Not applicable.
distributor or Government agency, etc., that supplies the item.
(7) The usable on code, when applicable
(2) PART NUMBER column. Indicates the primary
(see paragraph 5, Special information).
number used by the manufacturer (individual, firm,
(8) In the Special Tools List section, the
corporation or Government activity), which controls the
basis of issue (BOI) appears as the last line(s) in the
design and characteristics of the item by means of its
entry for each special tool, special TMDE and other
engineering drawings, specifications standards, and
special sup-port equipment.
When density of
inspection requirements to identify an item or range of
equipments supported exceeds density spread
Items
indicated in the basis of issue, the total authorization
(3) STOCK NUMBER column. This column lists the
is increased proportionately.
NSN for the associated part number and manufacturer
(9) The statement "END OF FIGURE"
identified in the PART NUMBER and CAGEC columns to the
appears just below the last item description in
left.
Column 5 for a given figure in both Section II and
(4) FIG. column. This column lists the number of
Section III. f.
QTY (Column (6)).
The QTY
the figure where the item is identified/located in Section
(quantity per figure Column) indicates the quantity of
II and III
the item used in the breakout shown on the
(5) ITEM column. The item number is that number
illustration figure, which is pre-pared for a functional
assigned to the item as it appears in the figure refer-enced in
group, subfunctional group or an assembly. A "V"
the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
appearing in this column in lieu of a quantity
indicates that the quantity is variable and the quantity
(1) FIG. column. This column lists the number of
may vary from application to application.
the figure where the item is identified/located in Section II and
III.
(2) ITEM column. The item number is that number
4. Explanation of Columns (Section IV).
assigned to the item as it appears in the figure refer-enced in
a. NATIONAL STOCK NUMBER (NSN) INDEX.
the adjacent figure number column.
(1) STOCK NUMBER column.
This
(3) STOCK NUMBER column. This column lists the
column lists the NSN by National item identification
NSN for the item.
number (NIIN)
(4) CAGEC column.
The Commercial and
Sequence. The NIIN consists of the last nine
Government
Entity (CAGE) Code (C) is a 5 digit
NSN
alphanumeric code used to identify the manufacturer,
digits of the NSN (i.e., 5305-01-674-1467)
distributor or Government agency, etc., that supplies the item.
NIIN
(5) PART NUMBER column. Indicates the primary
When using this column to locate an item, ignore the
number used by the manufacturer (individual, firm,
first 4 digits of the NSN. However, the complete
corporation or Government activity), which controls the
NSN should be used when ordering items by stock
design and characteristics of the item by means of its
number.
engineering drawings, specifications standards and
(2) FIG. column. This column lists the
inspection requirements to identify an item or range of items.
number of
the Figure where the item is
identified/located. The fig-ures are in numerical
order in Section II and Section III
(3) ITEM column.
The item number
identifies the item associated with the figure listed in
the adjacent FIG. Column. This item is also
identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this
index are listed by part number in ascending
alphanumeric sequence (i.e., vertical arrangement of
letter
and
124