TM 5-3895-377-13&P
4-34.
LEFT REAR MARKER LIGHT REPLACEMENT (CONT).
NOTE
Tag and mark all wires prior to
removal.
(4)
Remove nut (7), lock washer (8), washer
(9), and wire (10) from black terminal (11).
Discard lock washer.
(5)
Remove terminal lug (12), contact (13), and
preformed packing (14) from wire (10).
Discard performed packing and terminal
lug.
(6)
Remove wire (10) from marker light (4).
(7)
Remove two nuts (15), screws (16), marker
light (4), and gasket (17) from bumper (18).
Discard gasket.
b.
Installation.
(1)
Install gasket (17) and marker light (4) with
two screws (16) and nuts (15) on bumper
(18).
(2)
Install terminal lug (12) on wire (10).
(3)
Place wire (10) through bumper (18),
marker light (4), and socket.
(4)
Install preformed packing (14) and contact
(13) on wire (10).
(5)
Install wire (10) on black terminal (11) with
washer (9), lock washer (8), and nut (7).
Tighten nut.
(6)
Install lamp assembly (5) in grommet (6).
(7)
Install lamp (3) in marker light (4).
(8)
Install preformed packing (2) and lens (1).
NOTE
Follow-on Maintenance: Remove wheel
chocks (page 2-35).
END OF TASK
4-72
