TM 5-3895-377-13&P
4-56.
HUB AND DRUM ASSEMBLY REPLACEMENT.
This task covers:
a.
Removal
b.
Cleaning/Inspection
c.
Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic’s: Automotive
Solvent, Drycleaning (item 21, appendix E)
Wooden Block
Oil Seal
Press
Cotter Pin
Materials/Parts
Equipment Condition
Brush (item 2, appendix E)
Wheels Chocked (page 2-17)
Compound, Sealing (item 9, appendix E)
Wheel and Tire Assembly Removed
Grease (item 14, appendix E)
(page 3-7)
Rags, Wiping (item 19, appendix E)
a.
Removal
NOTE
This
paragraph
discusses
replacement of one hub and drum
assembly.
All
hub
and
drum
assemblies are replaced in the same
way.
(1)
Remove grease cap (1) from hub and
drum assembly (2).
Bearings
and
cups
are
not
interchangeable. Do not switch inner
or outer bearings and cups. Damage
will result to hub and drum assembly
and axle.
(2)
Remove cotter pin (3), nut (4), washer
(5), and bearing (6) from hub and
drum assembly (2). Discard cotter
pin.
(3)
Remove hub and drum assembly (2)
from axle (7).
4-140
