TM 5-3895-377-13&P
4-66.
LOW OIL LIMIT SWITCH REPLACEMENT (CONT).
(4) Remove four nuts (11), screws (12), and low oil limit
switch (4) from mounting bracket.
(5) Remove adapter (10) and preformed packing (13)
from low oil limit switch (4).
b.
Installation.
(1) Install adapter (10) and preformed packing (13) in low
oil limit switch (4).
(2) Install low oil limit switch (4) with four screws (12) and
nuts (11) on mounting bracket. Tighten nuts.
NOTE
Ensure that inner switch is seated in
notch
at
rear
of
switch
body.
Unseating will cause switch to not
operate properly.
(3) Insert two wires (6) and conduit (9) in adapter (10).
Tighten nut (8).
(4) Install two wires (6) on terminals (7) and tighten two
screws (5).
(5) Install gasket (3) and cover (2) with two screws (1) on
low oil limit switch (4). Tighten screws.
NOTE
Follow-on Maintenance:
•
Adjust low oil indicator (page 4-
194).
•
Remove wheel chocks (page 2-35).
END OF TASK
4-160
