TM 5-3895-377-13&P
NOTE
Tag and mark all wires prior to removal.
(11) Loosen screw (21) and remove wire (22) from
terminal 16 (23).
(12) Loosen screw (24) and remove wire (25) from
terminal L2 (26).
(13) Loosen screw (27) and remove wire (28) from
terminal L1 (29).
(14) Remove nut (30) from elbow (31).
(15) Remove elbow (31) and wires (22, 25, and 28)
from controller subbase (20).
(16) Remove four screws (32) and lock washers (33)
from mounting base assembly (14). Discard
lock washers.
(17) Remove screw (34), lock washer (35), washer
(36), mounting base assembly (14), and gasket
(37) from Heater (38). Discard lock washer and
gasket.
4-225