TM 5-3895-377-13&P
4-93.
BURNER MOTOR REPLACEMENT (CONT).
(12)
Matchmark burner motor (3) and motor flange
(19).
(13)
Remove four screws (20), lock washers (21),
and motor flange (19) from burner motor (3). Discard
lock washers.
b.
Installation.
(1) Aline matchmarks on motor flange (19) and burner
motor (3).
(2) Install motor flange (19) with screws (20) and lock
washers (21) on burner motor (3). Tighten screw.
NOTE
•
When installing motor wheel and
coupling, aline setscrews with
flat on the burner motor shaft.
•
Motor wheel and coupling may
need to be positioned in burner
housing before assembling with
burner motor.
(3) Install motor wheel (18) on burner motor (3) and
tighten setscrew (17).
(4) Install coupling (14) on burner motor (3) and tighten
setscrew (16).
NOTE
When installing burner motor align
setscrew with flat on the burner fuel
pump.
(5) Aline matchmarks on burner motor (3) and burner
assembly (12).
(6) Install burner motor (3) with three screws (15) on
burner assembly (12). Tighten screws.
4-250
