TM 5-3895-377-13&P
5-29.
HEAT EXCHANGER WIRING HARNESS REPLACEMENT (CONT).
(32) Position wires (7, 10, and 13) and elbow
(16) in controller subbase (5).
(33) Install nut (15) on elbow (16). Tighten nut.
(34) Install wire (13) on terminal L1 (14) and
tighten screw (12).
(35) Install wire (10) on terminal L2 (11) and
tighten screw (9).
(36) Install wire (7) on terminal 16 (8) and
tighten screw (6).
(37) Install burner controller (3) on controller
subbase (5) and tighten two captive screws
(4).
5-60
