TM 5-4520-244-14
Table 2-1.
Operator/Crew Preventive Maintenance Checks and Service
(Cont)
Procedures
For readiness reporting
equipment is not ready/
Item
Check for and have repaired
Item to be
No.
M
Inspected
available
or adjusted as necessary
14
Ignition
Insulation damage, severed
Cable is damaged or defective
cable
Cable
15
Magneto
Proper mounting -- obvious
Damaged or defective
damage
16
Drive
Damaged, defective, slipping
Torn or frayed.
V-Belt
Inspect for proper tension
Deflection is 3/4 to 1 -inch
midway between pulleys.
17
Damaged or defective
Indicators
Inspect fuel and temperature
for proper operation
18
Damaged or if does not adjust
Damper
Smooth operation, bent or
properly
damaged parts
Control
19
Pipes are damaged or cannot
Bent, corroded or leaky pipes
Stack
he installed
20
Side
Condition of panels interferes
Inspect for dents, corrosion
with proper heater operatlon
Panels
21
Information
Inspect for defaced, illegible
or loose condition
Plates
22
wheels and
Condition prevents proper
Inspect for damage, wear, proper
utilization of heater
inflation
Drums, Tires
and Tubes
Wheel Hubs
Inspect for damage
23
Condition prevents proper
proper utilization of heater
and
Listen for bearing noise
Change 5 2-5
