TM 5-4520-244-14
5-11 COMBUSTOR AND NOZZLE
This task covers:
Inspection/Test
Removal
.
Install
Inspection
INITIAL SETUP
References
Test
Equipment
None
Equipment Condition
Materials/Parts
Hood assembly removed
Maintenance Repair Parts
Personnel Required
Air system removed
1
REMARKS
ITEM
ACTION
LOCATION
Disengage clamp (1)
Nozzle holder
Combustor
from notches in
combustor (8).
Remove clamp (1).
Remove nozzle
holder (2) from
combustor plate
Unscrew nozzle (5)
Nozzle
from holder (2).
Separate: nozzle (5)
strainer (4), and
seal (3) from holder
(2)
Remove nuts (9) and
Combustor
washers (10). Remove
combustor (8) and gas-
ket (11) from heat ex-
changer.
INSPECTION
Inspect for damage.
Clamp (1)
Inspect for cracks,
Nozzle
damaged threads
holder (2)
Replace if not in
Seal (3)
serviceable condition
Wear
NOTE : Compressed air used for blowing dirt off parts must NOT exceed 15 psi.
5-11