TM
5-4520-244-14
REMARKS
ACTION
ITEM
LOCATION
REPAIR
Use epoxy patch
5. Fuel tank
N.S.N.8040-00-777-
0631. Remove
paint around leak.
Clean area with
sandpaper. Mix and
apply epoxy as in-
structed in patch
kit . Allow epoxy
to cure for 30 min-
utes or as specified
in manufacturer's
instructions.
Paint surface in
accordance with
T.O.35-1-3.
REASSEMBLE
6. Fuel tank
Install fuel gage (1)
Fuel gage
and gasket (2) in
tank 15).
Install packing (8)
Pipe plug
and plug (7) in tank
(15)0
Position barrel nuts
Barrel nuts
(17) in tank support
straps .
Position fuel tank
Tank
below heater and
attach by installing
screws (12) and wash-
ers (13) in barrel
nuts (17).
7. Skid base
Lift heater with
attached fuel tank
and position on steel
base . Install screws
(10), washers (11) and
nuts (9).
6-9
