TM 5-4520-253-13
lNSPECT/SERVICE/ADJUST/REMOVE/lNSTALL CARBURETOR (CONT)
INSTALLATION:
1.
2.
3.
4.
5.
6.
Install carburetor on burner head using four screws (12) and lock washers (13).
Connect wires (10 and 11) to green and blue wires of PC board assembly in accordance with tags.
Install carburetor heater (9) in carburetor (14). Connect wire (8) to white wire of PC board
assembly and wire (7) to fuel preheat thermostat (6).
Locate orange wire (5) and connect it to fuel preheat thermostat (6).
Install fuel lines (1 and 2) and secure by tightening nuts of male elbows (3 and 4).
Open shutoff valve at fuel container.
3-96
