TM 5-4520-256-14
3-16.
HOUR METER MAINTENANCE.
This task covers:
a.
Removal
b.
Inspection
c.
Cleaning
d.
Installation
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics
Materials Required:
Cleaning Solvent (Item 11, Appendix E)
Glass Cleaner (Item 3, Appendix E)
WARNING
Cleaning solvent, Federal specification P-D-680, is toxic and flammable. Use only in a well-
ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames. Do not
use in excessive amounts. Avoid skin contact.
Equipment Conditions:
Heater unit shut down and cool.
Power cable disconnected from power source.
Access door removed (para 3-10 a).
a.
Removal.
(1)
Tag and disconnect two quick-disconnect leads from rear of meter (2).
(2)
Remove three self-locking nuts (5), three flat washers (4), three screws (1), and meter (2) from control
panel (3).
Change 3 3-38
