POWER CONTROL - HUPP MF510C, MF60A-24V, MF60B-24V
This task covers:
a. Removal
c. Assembly
b. Disassembly
e. Test
d. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Solder gun 9 (Item 4, Appendix B)
Materials/Parts
Equipment Condition
Insulating Compound (Item 3, Appendix C)
Guard removed (page 2-32)
Transistor
Solder (Item 7, Appendix C)
Flux (Item 3, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1. Power control (1)
2. Igniter (3)
3. Igniter (3)
4. Terminal strip (8)
DISASSEMBLY
5. Circuit board(11)
6. Transistor (17)
7. Power control (1)
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
Two screw assemblies (2)
Unscrew and remove.
Igniter cover (4)
Remove.
Nut assembly (5) and wire (6),
Remove.
and grommet (7)
Screw assembly (9) and wire (10) Remove.
Four screws (15) and four
Remove.
nuts (16)
Two screws (18), three nuts (19), Unsolder wires and remove.
three washers (12), and one wire
(20)
Transistor (17)
Remove.
3-43
TM 9-2540-205-24&P
