TM 9-2540-205-24&P
THERMOSTAT ASSEMBLY - HUPP MF510B, MF510C, MF60A-24V, MF60B-24V
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Mechanics Gen (Item 1, Appendix B)
Guard removed (page 2-32)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
1. Terminal strip (1)
Four leads (2) and two screws (3) Unscrew and remove.
2. Thermostat assembly (4)
Two screws (5)
Unscrew and remove.
3. Reservoir (6)
Thermostat assembly (4)
Lift out of position.
INSTALLATION
4. Reservoir(6)
Thermostat assembly (4)
Place in position with number 3
wire closest to terminal strip (1 ).
5. Thermostat assembly (4)
Two screws (5)
Screw in and tighten.
6. Terminal strip (1)
Four leads (2) and two screws (3) a. Place leads in position on ter-
minals 3 and 5.
b. Screw in and tighten.
2-37
