TM 9-2540-207-14&P
3.
Reference Designator Index Work Package. Reference designators in this index are listed in ascending
alphanumeric sequence (vertical arrangement of letter and number combination which places the first letter or
digit of each group in order "A" through "Z," followed by the numbers "0" through "9" and each following letter or
digit in like order).
REFERENCE DESIGNATOR Column. Indicates the reference designator assigned to the item.
FIG. Column. This column lists the number of the figure where the item is identified/located in the repair parts
list or special tools list work package.
ITEM Column. The item number is the number assigned to the item as it appears in the figure referenced in the
adjacent figure number column.
SPECIAL INFORMATION
UOC. The UOC appears in the lower let corner of the Description Column heading. Usable on codes are shown as
"UOC:…" in the Description Column (justified left) on the first line under the applicable item/nomenclature. Un-coded
items are applicable to all models. Identification of the UOCs used in the RPSTL are:
Code
Used On
Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of
this RPSTL. Part numbers for bulk material are also referenced in the Description Column of the line item entry for the
item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be manufactured or
fabricated are found in TM N/A.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the item
number column. This index number is a cross-reference between the NSN/P/N index work packages and the bulk
material list in the repair parts list work package.
Associated Publications. The publication(s) listed below pertains to the N/A.
Publication
Short Title
Illustrations List. The illustrations in this RPSTL contain unit authorized items. Illustrations published in
TM 9-2540-207-13&P that contain unit authorized items also appear in this RPSTL. The tabular list in the repair parts list
work package contains only those parts coded "O" in the third position of the SMR code, therefore, there may be a break
in the item number sequence.
D-7
