TM 9-4520-257-12&P 0013 00
0013 00-3
1
10
H-45 TYPE II (LIQUID FUEL) HEATER
REMOVE
1. Remove the fuel can (1) from the fuel can stand (2) and place the fuel can (1) upright on the ground.
2. Remove the stack pipe assembly (3) from the stack flange (4) on the top heater shell (5).
3. Place an absorbent pad under the fuel flow control valve (6), and disconnect the female QD fitting (7)
on the flow control burner hose (8) from the flow control burner male QD fitting (9) on the fuel flow
control valve (6).
4. Loosen the wing nuts on the bolt and wing nut assemblies (10) holding the top heater shell (5) to the
heater body base (11), remove the bolt and wing nut assemblies (10) from the brackets (12), and
remove the top heater shell (5).
5. Remove the burner shell assembly (13) from the heater body base (11).
3
4
5
2
6
7
9
8
12
11
13
