UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN <a href="http://spacewaterheating.tpub.com/20/01-329-3451.htm">4520-01-329-3451</a> FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE

UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 CUP AND CABLE ASSEMBLY SERVICE, REPAIR, REPLACE CONT.

UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE CONT.

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_165" class="tooltip">124 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE CONT." class="tooltip">125 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_168" class="tooltip">126 4520-01-329-3451 CUP AND CABLE ASSEMBLY SERVICE, REPAIR, REPLACE" class="tooltip">127 4520-01-329-3451 CUP AND CABLE ASSEMBLY SERVICE, REPAIR, REPLACE CONT." class="tooltip">128 129 4520-01-329-3451 FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE CONT." class="tooltip">130 4520-01-354-1191 (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 REFERENCES" class="tooltip">131

TM 9-4520-257-12&P 0039 00 UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 FUEL FLOW CONTROL VALVE INSPECT, SERVICE, REPLACE 0039 00-1 INITIAL SETUP : Tools General Mechanic’s Tool Kit (WP 0041 00, Table 2, Item 1) Materials/Parts Absorbent Material (WP 0052 00, Table 1, Item 1) Brush (WP 0052 00, Table 1, Item 3) Rags (WP 0052 00, Table 1, Item 7) Personnel Required One Equipment Condition Heater shut down and cool (WP 0005 00) H-45 TYPE II (LIQUID FUEL) HEATER FUEL FLOW CONTROL VALVE REMOVE 1. Turn the OFF/ON control (1) on the fuel flow control valve (2) to the OFF position. 2. Place an absorbent pad under the fuel flow control valve (2), and disconnect the flow control burner hose (3), the fuel supply hose (4), and the fuel overflow hose (5) from the fuel flow control valve (2). Place the hose ends on the petroleum absorbent mat. 3. Remove the fuel flow control valve (2) from the bracket support (6) on the heater body base (7). 4. Unscrew the fuel strainer (8) and the gasket (9) on the fuel flow control valve (2). 5. Inspect the fuel flow control valve (2), fuel strainer (8), and gasket (9) for dirt, sediment, or other obstructions. SERVICE If necessary, clean the fuel flow control valve (2), fuel strainer (8), and gasket (9) with clean fuel, rags, and a brush to remove dirt or other obstructions. REPLACE If the fuel flow control valve (2) is damaged or inoperable, replace it. Transfer the fuel flow control mounting valve bracket from the replaced fuel flow control valve (2) to the replacement fuel flow control valve (2). INSTALL 1. Install the gasket (9) and fuel strainer (8) in the fuel flow control valve (2). Tighten only enough to prevent leakage. 2. Connect the flow control burner hose (3), the fuel supply hose (4), and the fuel overflow hose (5) to the fuel flow control valve (1). 3. Turn the fuel OFF/ON control (1) on the fuel flow control valve (2) to ON, and check for leaks.

Privacy Statement
Press Release
Contact